 |
» |
|
|
|
|
|
|
|
HP LaserJet 4050 Printer series - Product
Specifications
Introduction
This document lists the specifications
for the HP LaserJet 4050 printer.
Model
numbers
| Printer |
Model Number
|
| HP LaserJet 4050 printer |
C4251A |
| HP LaserJet 4050 N printer |
C4253A |
| HP LaserJet 4050 T printer |
C4252A |
| HP LaserJet 4050 TN printer |
C4254A |
| HP LaserJet 4050 SE printer |
C4255A |
| HP LaserJet 4050 USB-Mac printer |
C7829B
|
Serial number
location
The model number and printer serial
number are listed on an identification label located under the top
cover on the right side of the printer.
Printer
description
Quick and easy to install, this printer
provides fast, high-quality printing with ProRes 1200 for
outstanding graphics, and up to 220 levels of gray for smooth,
photo-like images. The printer features an online help system, and
has an expandable design for increased printing
flexibility.
Printer
features
Speed and
throughput
-
Instant-on fuser prints the first
page in 15 seconds.
-
Prints letter-size paper 17 pages per
minute (ppm) or A4-size paper 16 ppm
-
"RIP ONCE" capability with 16 MB or
hard disk option
Resolution
-
FastRes 1200 for faster
printing
-
ProRes 1200 for better graphics
-
Up to 220 levels of gray for smooth,
photo-like images
-
HP precision toner for clear, sharp
output
Language and
fonts
-
HP PCL 6, PCL 5e, and PostScript (R)
Level 2 emulation
-
110 fonts for Microsoft (R) Windows,
plus HP FontSmart
Expandable
design
-
500-sheet universal paper tray,
75-envelope power feeder, and duplex printing accessory
available
-
Flash storage for forms, fonts, and
signatures
-
Memory can be expanded up to 192
MB
-
Two EIO slots for connecting to
networks or additional devices
-
Jetsend
enabled
Printer
specifications
| Characteristic
|
Description
|
| Speed |
17 pages per minute (ppm)
133 MHz RISC microprocessor
First page out = 15
seconds
"RIP ONCE" capability with 16 MB or hard disk
option |
| Resolution |
300 dpi with PCL5e/HP's PostScript
Level 2 emulation (PS)
600 dpi with PCL5e/PS
HP
FastRes 1200 (PCL6, PS)
HP ProRes 1200 at engine speed
(17 ppm) (PCL6, PS) |
| Typefaces |
100 Scalable TrueType (80 built-in,
30 via HP FontSmart)
Euro symbol |
| Memory Options |
8 MB SDRAM standard (4050/4050
T)
16 MB SDRAM standard (4050 N/ 4050
TN)
Optional Memory:
4, 8, 16, MB EDO DIMMs
4, 8, 16, 32, 64 MB SDRAM DIMMs |
| Mass Storage Options |
2 and 4 MB Flash DIMMs Greater than
1 GB hard disk |
| Expansion Slots |
3 100-pin DIMM slots
2
enhanced I/O (EIO) slots |
| Interface |
Bidirectional IEEE 1284-compliant
parallel port
CJ3113A - 10/100Base-TX RJ-45 Jet Direct
Card (bundled with 4050 N/4050 TN)
(FIR) HP Fast
InfraRed Receiver (standard on the 4050 N/4050
TN)
(optional on the 4050/4050T)
RS232 9-pin
serial port
Paper Handling Connector (PHC) |
| Optional Networking |
10Base-T and
10Base-2
10/100Base-TX
Token
Ring
LocalTalk |
| Paper Trays |
100-sheet Tray 1
Size: 76 x
127 mm to 216 x 356 mm (3 x 5 inches to
legal)
500-sheet Tray 2 (4050/4050 N)
Size:
letter, legal, A4
250-sheet Trays 2 and 3 (4050 T/4050
TN)
Size: letter, A4, executive, legal, B5 (ISO), B5
(JIS), A5
Optional 500-sheet Universal
Tray
Supports standard and custom sizes from 149 x 210
mm (5.8 x 8.2 inches) to 216 x 356 mm (8.5 x 14 inches) |
| Paper Path |
Straight through from Tray 1 to Rear
Output Bin or to Top Output Bin |
| Output Capacity |
250-sheet Top Output Bin
50-sheet Rear Output Bin |
| Paper Handling Options |
Duplexer, Envelope Feeder, Optional
500-sheet Universal Tray Assembly |
| Duty Cycle |
Up to 65,000 pages-per-month
|
System
requirements
Windows
3.1x
The minimum system requirements for
users running Windows 3.1x are:
-
Windows 3.1x or Windows for
Workgroups 3.1x
-
MS-DOS (R) 5.0 or greater
-
386 processor or greater
-
4 MB RAM
-
4 MB available disk space
-
For full functionality, a network
service should be installed. An IEEE-1284-compliant parallel cable
and/or an HP Jetdirect card are also
recommended.
Windows
9X
The minimum system requirements for
users running Windows 9x are:
-
Windows 95 or Windows 98
-
386 processor or greater
-
8 MB RAM, 16 MB recommended
-
4 MB available disk space
-
For full functionality, a network
service should be installed. An IEEE-1284-compliant cable and/or
an HP Jetdirect card are also
recommended.
Windows NT
4.0
The minimum system requirements for
clients running Windows NT 4.0 Workstation are:
-
32-bit x 86-based microprocessor
(such as Intel 80386/25 or higher) and Intel Pentium (R)
-
VGA or higher resolution
-
8 MB free hard disk space
-
12 MB RAM; 16 MB recommended
-
Network adapter card
recommended
Physical
specifications
| Characteristic
|
HP LaserJet 4050/4050
N |
HP LaserJet 4050 T/4050
TN |
| Height |
34.3 cm (13.3 inches) |
38.5 mm (15.5 inches) |
| Width |
39 cm (15.4 inches) |
39 cm (15.4 inches) |
| Depth |
61.64 cm (24.27 inches) |
61.64 cm (24.27 inches) |
| Depth (trays/rear output bin open)
|
100.76 cm (39.67 inches) |
100.76 cm (39.67 inches) |
| Weight (without print cartridge) |
17.85 kg (39.27 lbs.) |
20.71 kg (45.66 lbs.)
|
Electrical
specifications
| Printer State
|
Power Consumption (average,
in watts) |
| Printing |
330 |
| Standby |
22 |
PowerSave
(default
activation time,
30 minutes) |
20 |
| Off |
0 |
Minimum
recommended circuit capacity
| Voltage |
Amps |
| 100-127 Volts |
8 amps |
| 220-240 Volts |
4 amps
|
Power
requirements (acceptable line voltage)
| Voltage |
Hz |
| 100-127 Volts |
50-60 Hz |
| 220-240 Volts |
50-60 Hz
|
Environmental
specifications
| Condition
|
Specification
|
| Operating Temperature |
10 to 32 degrees C
50 to 90
degrees F |
| Relative Humidity |
20% to 80%
|
Acoustic
emissions (per ISO 9296)
| Condition
|
Specification
|
| Printing, 17 ppm |
LWAd = 6.6 bels (A) |
| Printing, 8 ppm |
LWAd = 6.2 bels (A) |
| PowerSave |
LWAd = 0 bels (A)
|
Warranty
| Product |
Duration of
Warranty |
| HP LaserJet 4050, 4050 N, 4050 T,
4050 TN |
1 year, return to HP or Authorized
Dealer |
| HP Print Cartridge |
Coverage lasts until the HP toner is
depleted; at which time the warranty expires.
|
Safety
certifications
| Certification
|
Description |
| Safety: |
IEC 950:1991+A1+A2+A3 / EN
60950:1992+A1+A2+A3+A4+A11
IEC 825-1:1993 / EN
60825-1:1994 Class 1 (Laser/LED) |
| EMC: |
CISPR 22:1993+A1 / EN 55022:1994
Class B (1)
EN 50082-1:1992
IEC 801-2:1991 /
prEN 55024-2:1992 -
IEC 801-3:1984 / prEN 55024-3:1991
-
IEC 801-4:1988 / prEN 55024-4:1992 - |
4 kV CD, 8 kV AD
4
V/m
0.5 kV Signal Lines
1.0 kV Power Lines
|
IEC 1000-3-2:1995 /
EN61000-3-2:1995
IEC 1000-3-3:1994 / EN61000-3.3:1995
FCC Title 47 CFR, Part 15 Class B (2)) / ICES-003,
Issue 2 / VCCI-2 (1))
AS / NZS 3548:1992 / CISPR
22:1993 Class B (1)) |
Supplementary
Information:
The product herewith complies with the
requirements of the following Directives and carries the
CE-marking accordingly:
the EMC directive
89/336/EEC
the Low-Voltage Directive
73/23/EEC
[1] The product was tested in a typical
configuration with Hewlett-Packard Personal Computer
Systems.
[2] This Device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: This device may not cause harmful interference,
and this device must accept any interference received,
including interference that may cause undesired operation.
| |
|
Printable
version
