This section will guide you through the installation and setup process for VZAccess Manager. Before getting started, you should become familiar with the documentation that came with your wireless device.
CD's
If VZAccess Manager was obtained in a Mobile Office kit, install the USB drivers for your phone from Disc 1 before installing VZAccess Manager that is on Disk 2.
If you purchased a PC card, there is only one CD that contains VZAccess Manager and device drivers.
Installing VZAccess Manager
Follow these steps to install VZAccess Manager:
| 1. | Turn on your computer and close all applications. |
| 2. | Insert the CD-ROM into your CD drive. |
| 3. | If set up does not automatically start, click the Start button on the taskbar and choose Run. Type D:\Start (where D is the letter of your CD-ROM drive) and click OK. |
| 4. | Follow the steps in the next section... |
|
Important: If using a PC card, VZAccess Manager must be installed before you insert the card in to the computer for the first time. Only after the software has been installed can Windows successfully install and configure the card. |
|
Important: If you are planning to use a Global PC card outside the U.S., the following installation must be performed within BroadbandAccess/NationalAccess coverage area prior to leaving the US:
|
Please continue by clicking below:
The VZAccess Manager Setup Program